BIG DOG OUTER PRIMARY INSPECTION COVER GASKET ALL 2005-11 MODELS BAKER DSSC

Description

NEW OEM BIG DOG MOTORCYCLES
FIBER
OUTER PRIMARY INSPECTION COVER GASKET FOR
ALL 2005-2011 BIG DOG MODELS WITH BAKER DSSC TRANSMISSION
. MADE BY INTERFACED PERFORMANCE STAMPED CMP-4200.
CMP-4200 IS A SOLVENT FREE, HIGH PERFORMANCE COMPRESSED MICRO PORE GASKET MATERIAL. IT WAS DEVELOPED FOR STEAM, WATER, OIL, AND CHEMICAL RESISTANCE IN ORIGINAL EQUIPMENT AND INDUSTRIAL APPLICATIONS. IT HAS EXCEPTIONAL SEALABILITY, TORQUE RETENTION, CRUSH AND BLOW OUT RESISTANCE, AND IS INTENDED FOR APPLICATIONS WITH SHORT DURATION MAXIMUM TEMPERATURES UP TO 350*C.
Material Description:
CMP-4200 is a solvent-free, high performance compressed MicroPore gasket material. It was developed for steam, water, oil, and chemical resistance in Original Equipment and Industrial applications. It has exceptional sealability, torque retention, crush and blowout resistance, and is intended for applications with short duration maximum temperatures up to 350°C (650°F).
Typical Properties:
Property
Value
Method
Density, g/cc(lb/cu.ft)
1.55 (97) (min.)
ASTM F 1315
Compressibility, % (at 34.5MPa)
7-17
ASTM F 36
Recovery, %
50 (min.)
ASTM F 36
Tensile Strength, AMD, MPa(psi)
12 (1740) (min.)
ASTM F 152
Flexibility, Mandrel Bend, 12 X Ga.
No Cracks
ASTM F 152
Fluid Resistance, IRM903 Oil
ASTM F 146
Change in Thickness, %
15 (max.)
Change in Weight, %
25 (max.)
Change in Tensile Strength, %
30 (max.)
Change in Compressibility, %
17 (max.)
Fluid Resistance, Fuel B
ASTM F 146
Change in Thickness, %
15 (max.)
Change in Weight, %
20 (max.)
Binder Type
Fully Cured Nitrile Butadiene
Styrene Butadiene Rubber Blend
Color
Grey
Check out my
other items
!
Be sure to add me to your
favorites list
!
We have been selling Big Dog Motorcycle parts on ebay since 2003. We started as the original Big Dog factory liquidation outlet, then progressed to the exclusive contract buyer for all surplus parts from the factory including new overstock.
When the company was foreclosed on in 2013, we purchased the remaining inventory and all of the original tooling from the bank. Since then, we have continued to manufacture new Big Dog Motorcycle parts with most of the original vendors using factory O.E.M. specs and materials. We have also upgraded some old parts and developed new parts in the manufacturing process.
Call Donna for questions 6202572009